ADHESIVES

Water Based

Solvent Less

Solvent Based

Water based

Robond L90 D
Robond L-90D is a market leader since its inception 2005 is ready-to-use waterborne acrylic Co Polymer. Properties:
PH    6.5 – 7.5 Viscosity               <50 Solids                   41.5% Density KG/L       1.06 Shelf Life             420 Days Features and Benefits
One-part 100% Aqueous Formaldehyde-free FDA 175.105 compliance Fast line speeds, Speed 175 mpm Adhesion to metallized films Compatibility with both solvent and waterborne inks High bond strength Adhesion to a wide variety of films Excellent film clarity &Low odor Compatibility with PVDC coated films Robond L98 D
Robond L-98D is our one of exclusive products with the highest number of solid content in the world. Properties:
PH                         7-8 Viscosity               <50 Solids                   46% Density KG/L       1.06
Feature & Benefits
Enhanced bond strength and suitable for the polyethylene structure. Fast running speedofupto 250 mpm Efficient solution with simplified process Improved performance can extend to mid-range Good appearance with improved ink wettability Eco-friendly, non-flammable solutionwith full regulatory compliance (Typical Application             Laminating structure) from TDS
RobondL72 D
Robond L72D is most economical grade we offer.
Properties:
PH         7.5 Viscosity               <50 Solids                   42% Density KG/L       1.05 Wet Appearance Milky White Features and Benefits
100% Aqueous Formaldehyde-free FDA 175.105 compliance Line speeds, Speed 120 mpm Adhesion to metallized films Excellent film clarity & Low odor
Robond L180D
Robond L180D is latest product of Dow with low viscosity and hi solids.
Properties:
PH                         7.0 Viscosity               50 cps Solids                   45% Weight/Gallon     8.8 lb/gallon
Features and Benefits
If coreacteted with second component it could laminate variety of substrate including treated polyolefins, nylon and treated polyester Formaldehyde-free FDA 175.105 compliance Fast line speed Adhesion to metallized films Compatibility with both solvent and waterborne inks High bond strength Excellent film clarity & Low odor

Solvent Less

Morfree 698A/C79
MOR-FREE 698A+C 79 is a solvent free two-component polyurethane system.
Applications
BOPP || MET BOPP Treated PET || PE Alufoil || PE CPP || PET MET PET || PE ETC
Features & Benefits
Good bonds to almost all substrates. Suitable for metallised and barrier films. Suitable for Thermal process such as pasteurization and boiling Operator friendly. Suitable for high Speed Machines Better ink wetting/Bonding Excellent film Appearance
Morfree 899A/C99
MOR-FREE 698A+C 79 is a Hi Performance and Low viscosity solventless two-component polyurethane system.
Applications
BOPP || MET BOPP Treated PET || PE Alufoil || PE CPP || PET MET PET || PE ETC
Features & Benefits
Excellent COF stability after lamination Good bonds to almost all substrates. Good heat and product resistance Good clarity Fast converting line speed Suitable for metallised and barrier films. Suitable for Thermal process such as pasteurization and boiling Operator friendly. Suitable for high Speed Machines Better ink wetting/Bonding Excellent film Appearance
PacAcel 968 / C-108
PacAcelTM 968/PacAcelTM C-108 is a solvent-free, 100% solid, two component polyurethane system designed for medium performance applications with good COF neutral performance, excellent heat and chemical resistance. This product is to cater medium performance application such as hot fill, Tomato Ketchup, fabric, softener &etc. PACACEL™ 968/C-108. This adhesive grade can replace solvent based adhesive grades for such applications and turn out to be much more cost effective. This adhesive also has very fast bond development and you can slit laminates just 12 hours after the lamination operation. PacAcelTM 968/PacAcelTM C-108 is suitable for laminating polyester, polyethylene, and other polyolefin films, unprinted or reverse printed. PacAcelTM 968/PacAcelTM C-108 may also be used for laminating metalized film and aluminum foil.
Typical Properties:

  • Fast laminating speed
  • Good COF stability after lamination
  • High bonding strength on aluminum structure
  • Excellent heat and product resistance

Solvent based

Adcote548/81R
ADCOTETM 548-81R Adhesive/Coreactant F is a solvent-based two-component polyurethane adhesive system with high chemical and temperature resistance. It is suitable for the lamination of films such as PETP,PA,PP,PE(includingEVAtypes)aswellasmetalizedandaluminumfoilstructures. This adhesive has high heat and product resistance for packaging applications like boil-in bag,aggressive materials such as tomato concentrates,soaps and cosmetics.
Bostik LG-31
LG-31 is a solvent based moisture-curing one component Polyurethane system. LG-31 is “all-round” adhesive for all film/film, film/aluminum, paper and cardboard laimnates.
Solids:                        74% +/- 1 Viscosity:            2700 +/- 700 cps Density:               1.06 g/cm3 Solvent:               Ehtyl Acetate Color:                   Pale Yellow to SI Brown Appearance:       Transparent to SI. Hazy
Avinor – AV100
It is a moisture curing single component solvent based polyurethane adhesive for flexible packaging. It offers good bond strength and optical clarity, as well as good heat and chemical resistance properties.
Properties
Solids:                        75% +/- 2 Viscosity:            1000 +/- 500 cps
Density:               1.09 g/cm3 Solvent:               Ehtyl Acetate Color:                   Pale Yellow to SI Brown Appearance:       Transparent to SI. Hazy